Check all hydraulic pipes of scissor lift China and fittings. The pipe can't loose and be broken. All connectors joint must be tightened. Remove and cut apart fixed fork lift platform down valve, the plunger with compressed air blowing off, and then loaded into, from the beginning.The hydraulic oil of stationary scissor lift is put rejected, tighten the joint remove oil filter, after cleaning, use compressed air to clean up clean, and then back into the tank, and the connecting line.
Fixed shear fork lift platform
Check the roller, the central shaft and bearing, cylinder pin shaft and bearing, boom hinge axle and bearing such as presence of wear and tear, the bolt looseness with and without.Each part are some lubricating oil filling, extend bearing life.Oil and oil level of hydraulic lifting platform.Rise all the way, at this point, the hydraulic oil level should be above 40 ~ 50 mm at the bottom.If discover the hydraulic oil may have a dark, sticky gravel and other foreign bodies, should be timely exchange
